Plug the ESP32 into any USB power adapter. The blue LED will blink while connecting.
2
Connect to MyAlerts-Setup hotspot
On your phone or laptop go to WiFi settings and connect to MyAlerts-Setup. Then open your browser and go to 192.168.4.1 to enter your WiFi name, password, and phone number.
3
Enter your details below and click Connect
Enter your name, phone number, and country. The app will automatically find your MyAlerts device on your network.
4
Mount your sensor
Attach the switch to your door frame and the magnet to the door. When they separate — your phone rings.
Monitor Configuration
* Include country code
🇨🇦 English
Between alerts
From iot.tuya.com → Project Overview
Access Secret/Client Secret
From Devices tab → Device ID column
Click Find to locate your device
Live Sensor Status
ESP32 ConnectionNot Started
Tuya PollingNot Started
🔒
Waiting for sensor
Connect to begin monitoring
No events yet — monitoring will begin after connecting.
Event Log
--:--Waiting for sensor events…
Installation Guide
🚪
Door Frame
Mount the switch (the part with the wire) on the door frame using the included screws or adhesive.
🧲
Door Magnet
Mount the magnet on the door itself, aligned with the switch. They should be within 1cm when door is closed.
🔌
Power Supply
Plug the ESP32 into any USB phone charger. Place it near the door within cable reach.
📶
WiFi Range
Ensure the ESP32 is within range of your WiFi router. The blue LED stays solid when connected.
🔄
Moving or changing WiFi? Hold the BOOT button on the ESP32 for 5 seconds. The device will restart and show the MyAlerts-Setup hotspot again for reconfiguration.